Nokia 2285 - 18 Reference information

[ 72 ]

Operating environment

Remember to follow any special regulations in force in any area and always switch off your
phone whenever it is forbidden to use it, or when it may cause interference or danger.

Use the phone only in its normal operating positions.

Electronic devices

Most modern electronic equipment is shielded from radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the RF signals from your wireless phone.

PACEMAKERS
Pacemaker manufacturers recommend that a minimum separation of at least 6 inches
(approximately 15.3 cm) be maintained between a handheld wireless phone and a pacemaker
to avoid potential interference with the pacemaker. These recommendations are consistent
with the independent research by and recommendations of Wireless Technology Research.
Persons with pacemakers:

• Should always keep the phone more than 6 inches (15.3 cm) from their pacemaker when the

phone is switched on

• Should not carry the phone in a breast pocket

• Should use the ear opposite the pacemaker to minimize the potential for interference.

• Switch off the phone immediately if you have any reason to suspect that interference is

taking place.

HEARING AIDS
Some digital wireless phones may interfere with some hearing aids. In the event of such
interference, you may want to consult your service provider.

Other medical devices

Operation of any radio transmitting equipment, including cellular phones, may interfere
with the functionality of inadequately protected medical devices. Consult a physician or the
manufacturer of the medical device to determine if they are adequately shielded from external
RF energy or if you have any questions. Switch off your phone in health care facilities when
any regulations posted in these areas instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor
vehicles (for example, electronic fuel injection systems, electronic antiskid/antilock braking
systems, electronic speed control systems, air bag systems). Check with the manufacturer or its
representative regarding your vehicle. You should also consult the manufacturer of any
equipment that has been added to your vehicle.

POSTED FACILITIES
Switch your phone off in any facility where posted notices so require.

Potentially explosive atmospheres

Switch off your phone when in any area with a potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas could cause an explosion or fire resulting in property
and/or bodily injury or even death.

Users are advised to switch off the phone when at a refuelling point (service station). Users are
reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants, or where blasting operations are in progress.

[ 73 ]

Reference information

Areas with a potentially explosive atmosphere are often but not always clearly marked. They
include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied
petroleum gas (such as propane or butane); areas where the air contains chemicals or particles,
such as grain, dust, or metal powders; and any other area where you would normally be advised
to turn off your vehicle engine.

Vehicles

Only qualified personnel should service the phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and may invalidate any warranty which may apply
to the unit.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating
properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment
as the phone, its parts or enhancements.

For vehicles equipped with an air bag, remember that an air bag inflates with great force.
Do not place objects, including both installed or portable wireless equipment in the area over
the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly
installed and the air bag inflates, serious injury could result.

FCC regulations prohibit using your phone while in the air. Switch off your phone before
boarding an aircraft. The use of wireless telephones in an aircraft may be dangerous to the
operation of the aircraft, disrupt the wireless telephone network, and may be illegal.

Failure to observe these instructions may lead to suspension or denial of telephone services to
the offender, legal action or both.

Emergency calls

Important:

This phone, like any wireless phone, operates using radio signals, wireless,

and landline networks as well as user-programmed functions. Because of this,
connections in all conditions cannot be guaranteed. Therefore you should never
rely solely upon any wireless phone for essential communications (for example,
medical emergencies).

Emergency calls may not be possible on all wireless phone networks or when certain network
services and/or phone features are in use. Check with local service providers.

Make an Emergency Call

1

If the phone is not on, switch it on.

2

Press the end key as many times as needed (for example, to exit a call, to exit a menu, etc.)
to clear the display and ready the phone for calls.

3

Enter the emergency number for your present location (for example, 911 or any other official
emergency number—emergency numbers vary by location).

4

Press the talk key.

• If certain features are in use, you may first need to turn those features off before you can

make an emergency call. Consult this user guide and your local cellular service provider.

• When making an emergency call, remember to give all the necessary information as accurately

as possible. Remember that your wireless phone may be the only means of communication
at the scene of an accident - do not end the call until given permission to do so.

[ 74 ]

•

CERTIFICATION INFORMATION (SAR)

THIS MODEL PHONE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO
RADIO WAVES.

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for the general population. The guidelines
are based on standards that were developed by independent scientific organizations through
periodic and thorough evaluation of scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons, regardless of age and health.

The exposure standard for wireless mobile phones employs a unit of measurement known as
the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg.* Tests for SAR
are conducted using standard operating positions accepted by the FCC with the phone
transmitting at its highest certified power level in all tested frequency bands. Although the SAR
is determined at the highest certified power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power required to reach the network. In
general, the closer you are to a wireless base station antenna, the lower the power output.

Before a phone model is available for sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the government-adopted requirement for
safe exposure. The tests are performed in positions and locations (for example, at the ear and
worn on the body) as required by the FCC for each model. The highest SAR value for this model
phone as reported to the FCC:

When tested for use at the ear-

FCCID # QMNRH-3 is 1.15 W/kg

When worn on the body, as described in this user guide-

FCCID # QMNRH-3 is 0.99 W/kg

(Body-worn measurements differ among phone models, depending upon available
enhancements and FCC requirements).

While there may be differences between the SAR levels of various phones and at various
positions, they all meet the government requirement.

The FCC has granted an Equipment Authorization for this model phone with all reported SAR
levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this
model phone is on file with the FCC and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID QMNRH-3.

For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines
for use with an enhancement that contains no metal and that positions the handset a
minimum of 7/8 inch (2.2 cm) from the body. Use of other enhancements may not ensure
compliance with FCC RF exposure guidelines. If you do not use a body worn enhancement, and
are not holding the phone at the ear, position the handset a minimum of 7/8 inch (2.2 cm) from
your body when the phone is switched on.

[ 75 ]

Reference information

*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/
kilogram (W/kg) averaged over one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public and to account for any variations
in measurements. SAR values may vary depending on national reporting requirements and the
network band. For SAR information in other regions please look under product information at:

http://www.nokia.com